CFIA Clarified Heat Treatment Standards for Wood Packaging: What Importers Need to Check
CFIA updated its heat treatment export directive on November 4, 2026, clarifying the same ISPM 15 standards they enforce on incoming wood packaging material. Here's what to check on your ocean freight and what happens when pallets fail inspection.
CFIA published a revised D-13-01 directive on November 4, 2026, clarifying heat treatment standards for Canadian wood product exports to Australia. The requirements didn’t change, just the wording in Appendix 9. But the treatment standards CFIA detailed (heat treatment, kiln drying, surfacing) are the same ones they enforce on wood packaging material coming INTO Canada. If you’re importing ocean freight, that’s what CFIA inspects when your container clears.
Every wood pallet, crate, and piece of dunnage entering Canada needs an ISPM 15 compliance mark: the HT stamp showing heat treatment to core temperature, the country code, the producer registration. CFIA can refuse entry, order treatment, or require destruction of non-compliant WPM. It delays release, costs money, and puts the importer in the fallout.
What the ISPM 15 Mark Should Look Like
The compliant mark is stamped or stenciled on the wood itself, not on a sticker. You’re looking for a two-letter country code (CN for China, US for United States), a unique producer registration number, and the treatment code (usually HT for heat treatment). The mark format is standardized: XX-000-HT, where XX is the country, 000 is the producer ID, and HT is the treatment method.
Debarked wood only. If CFIA finds bark or sawdust pockets during examination, they can refuse the WPM even if it’s marked. The international standard requires bark removal before treatment because pests hide under bark.
CFIA doesn’t inspect every container, but when they do examine cargo for OGD or compliance reasons, WPM is on the checklist. Non-compliant pallets turn up regularly at Montreal sufferance warehouses, usually on shipments from suppliers who used local unmarked wood or counterfeit stamps.
What Happens When WPM Fails Inspection
CFIA issues a Notice of Non-Compliance. The importer has three options:
Treatment: The WPM is heat-treated or fumigated at the importer’s expense. That usually means drayage to a treatment facility, the treatment itself, and drayage back. Figure 3 to 5 business days minimum, plus treatment and handling fees.
Export: Ship the goods back out of Canada on the same WPM. This option exists, but most importers aren’t going to pay ocean freight twice and lose the sale.
Destruction: CFIA approves destruction of the WPM, and the goods are transferred to compliant packaging. This is the most common fix. Unload the container, destroy the pallets, reload onto ISPM 15-compliant skids, and release.
The delay is usually 2 to 4 business days from the CFIA notice to the repackaging and release. If your freight has a delivery window or a cross-dock slot, you’ve missed it.
The cost depends on how much WPM needs replacing and who’s handling the repackaging. Transferred to compliant pallets at a sufferance warehouse, you’re looking at labour, materials, and storage. We typically see costs between CAD 800 and CAD 2,000 for a full container, depending on pallet count and scheduling.
Who’s Liable
The importer of record. Not the supplier, not the freight forwarder, not the carrier. Even if your supplier in Shenzhen used a local pallet supplier who slapped a fake HT mark on untreated pine, CFIA holds you responsible.
You can push the cost back to your supplier if your purchase terms put packaging responsibility on them, but CBSA and CFIA don’t care about your commercial contract. The Notice of Non-Compliance goes to the importer on the CAD, and the importer pays for treatment or destruction.
This is why WPM compliance is part of supplier qualification. If you’re onboarding a new supplier or switching from air to ocean, confirm they understand ISPM 15 and use a certified WPM provider. Ask for photos of the marks. Check the format against the ISPM 15 standard before the first shipment.
Most suppliers in major Asian export hubs understand ISPM 15, but compliance quality varies. A factory using a vetted WPM provider will show you supplier certifications and mark photos on request. A factory that says “don’t worry, we always use export pallets” is a red flag.
The Practical Side
If you’re importing multiple containers per month, eventually you’ll get a WPM non-compliance. It’s not always the supplier’s fault. Sometimes a compliant pallet gets mixed with unmarked ones at the consolidation warehouse, or the mark is too faint to read, or the wood got wet and the stamp bled out.
When it happens, the response time matters. CFIA issues the notice to your broker of record, the broker notifies you, and you decide: treatment, export, or destruction. If you’re sitting on the decision for two days because nobody knows where to source ISPM 15 pallets in Montreal, you’re paying detention and warehouse storage while the container sits.
We keep a list of local ISPM 15 pallet suppliers and treatment facilities for exactly this scenario. When a client gets a WPM non-compliance notice, we send them the contact list, they pick a supplier, and the warehouse coordinates the transfer. The container is unloaded, the WPM is destroyed, the goods are reloaded, and CFIA clears release the same day.
If your broker doesn’t have that list, or your warehouse doesn’t handle WPM repackaging, you’re calling around while the clock runs.
When to Escalate to CFIA Directly
Most WPM issues are straightforward: non-compliant pallets get replaced, CFIA signs off, goods release. But if CFIA finds live pests, larvae, or signs of infestation, the fallout gets bigger. They can order fumigation of the entire container, not just the WPM. They can refuse entry outright and require export. They can escalate to a formal enforcement action if they suspect intentional circumvention (fake HT stamps, for example).
If you’re in that situation, don’t try to negotiate it yourself. CFIA’s Plant Protection division handles pest-related non-compliance, and the decision tree is technical: what species, what life stage, what treatment protocol is approved for that pest. Your customs broker should be coordinating with CFIA directly and getting you a clear breakdown of the options and the cost.
You can find CFIA’s full ISPM 15 import requirements in directive D-98-08 on the CFIA website. The updated export directive (D-13-01) is also posted there as of November 4. The treatment standards are reciprocal: what CFIA expects Canadian exporters to meet is what they’re checking on your imports.
Most suppliers get ISPM 15 right. When yours doesn’t, the fix is mechanical: find compliant pallets, transfer the goods, clear release. We walk clients through it weekly. Get in touch.
Source: CSCB
Related insights
- What a Canadian Customs Broker Actually Does (And When You Need One)
- CFIA's Brazil Porcine Blood Meal Certificate: What It Tells Importers About Species Segregation
- CFIA AIRS Extensions Just Moved on Coffee Husks and Angelica Root — Here's What Changed
- Three New Controlled Substances Hit Import Watch Lists June 5
- CFIA and IPPC Draft ISPM Consultations: What Importers Should Watch Before September 30