CanFlow Global
D10-14-38 Update: CBSA Tightens the Line on Unassembled Furniture Classification
← All insights
tariff-classificationfurniture-importshs-codesimacustoms-compliance

D10-14-38 Update: CBSA Tightens the Line on Unassembled Furniture Classification

CBSA's updated D10-14-38 clarifies when flat-pack furniture classifies as complete articles versus parts, a distinction that drives duty rates, SIMA exposure, and CUSMA origin claims. If you've been filing unassembled furniture as parts, this memo matters.

CBSA just updated D10-14-38, the memo that tells you whether your flat-pack furniture shipments classify as complete furniture or as parts. Published November 3rd, the refresh doesn’t rewrite the rule, but it tightens the line between the two.

If you’re bringing in unassembled office furniture from China, knockdown retail display units, or anything else that arrives in pieces, this one matters. The classification difference drives duty rates, SIMA exposure, and whether your CUSMA certificate actually covers what you filed.

GRI 2(a) and the essential character test

The core rule is General Rule of Interpretation 2(a): an incomplete or unassembled article classifies as the complete article if it has the essential character of the complete product. For furniture, that usually means all the components for one functional piece are present: desktop, legs, hardware, drawer slides.

If the shipment includes everything needed to assemble a desk, CBSA expects you to classify it as a desk (Chapter 94), not as “parts of furniture.” If you’re importing only legs, or only drawer hardware, those are parts.

The difference shows up in duty and AD/CVD exposure. Complete wooden furniture from China often carries SIMA duties on top of the MFN rate. Parts might not. If you’ve been filing as parts when CBSA expects complete article classification, you’ve underpaid. That’s an AMPS case waiting to happen.

Where this catches importers

Flat-pack furniture is the obvious one. Most commercial furniture today ships unassembled to save freight costs: desks, chairs, shelving, retail display units. The components arrive palletized, sometimes shrink-wrapped as a set, sometimes mixed across cartons.

CBSA’s position: if the invoice line is “office desk, model XYZ-200, unassembled” and the shipment includes all the parts for that desk, classify it as a desk. Don’t split it into parts just because it’s not bolted together yet.

We see this trip up importers in three places:

SIMA goods. Wooden bedroom furniture from China and Vietnam has been subject to SIMA measures for years. If your supplier ships it flat-pack and you classify as parts to dodge the AD/CVD, that’s not going to survive a verification. CBSA will pull the commercial invoice, match components to the finished article, and reassess. You’ll pay the SIMA margin retroactively, plus penalty.

CUSMA origin claims. If you’re claiming CUSMA preference on a shipment of unassembled furniture, your Certificate of Origin needs to cover the complete article classification. If the certificate says the parts qualify but CBSA reclassifies the shipment as complete furniture, the origin claim falls apart. Preference denied, MFN duty assessed, importer pays the difference.

Chapter 94 versus Chapter 73/76/other. Furniture parts sometimes slip into the base material chapter (steel furniture parts in 73.26, aluminum in 76.10). That’s fine for hardware or generic brackets. It’s not fine for a complete set of components that clearly make up a functional piece. If the set has the essential character of furniture, it classifies in Chapter 94, even if every individual piece is metal.

What to check on your CADs

Pull a few recent entries where you imported unassembled furniture. Check the HS code you filed against the invoice description and the actual shipment composition.

If the invoice says “desk, unassembled” and you filed under a parts heading, you should probably revisit that. If the shipment is a mixed container with ten different SKUs and half of them are complete unassembled pieces, those should classify as complete articles.

The CARM Statement of Account now shows every CAD line in detail. If CBSA flags a classification issue, you’ll see it as a re-determination or a compliance verification request. We’re seeing more of those in 2026 than we did under the old K84 system. CARM gives CBSA better line-level visibility, and they’re using it.

If you’ve been filing consistently as parts and you think the classification is defensible, document why. Keep records that show why the shipment is parts, not a complete article. CBSA can ask for those records anytime within four years of release.

D-memo updates and your compliance program

Most D-memo updates are minor: formatting, cross-reference fixes, maybe a clarification that doesn’t change the substance. This one is a clarification, but it’s the kind that settles uncertainty. If you weren’t sure whether your flat-pack imports should classify as complete furniture, D10-14-38 now gives you the framework.

The memo itself is on the CBSA publications page. If furniture is a recurring line in your import program, the examples section shows the edge cases: sets versus pieces, what counts as essential character, how to handle mixed shipments.

If this changes your classification approach, you’ll need to update your HS classification records and notify your broker. We file CADs based on the HS code and description you give us. If the classification changes, the CAD changes, and so does the duty line.

For imports already released, you have two options if you think you overpaid: file a section 74 adjustment request within four years of the accounting date. If you underpaid, you’re supposed to self-correct with a B2 (supplementary CAD). Waiting for CBSA to catch it is not a strategy. AMPS penalties are steeper than the voluntary disclosure route.

Most flat-pack furniture ends up in a warehouse before it ships to the end customer. If you’re running inbound through a Montreal sufferance warehouse, the goods stay under CBSA control until release. That gives you time to confirm classification before the CAD gets filed. Once the goods leave the warehouse, the accounting is done. Any correction after that is a post-release adjustment.

This is one of those updates that looks small but catches importers who’ve been riding a questionable classification for years. CBSA just told you where the line is. If your current filings sit on the wrong side of it, now’s the time to fix that.

If you want a second look at how your furniture imports are classified, that’s exactly the kind of review we run before it becomes a verification case. Get in touch.

Source: CSCB

Talk to a broker